Dual Fuel Range Cooker With 13amp Plug
Are you a cook at home who enjoys the fast heat control of gas cooktops but wants an electric oven to bake? Discover a dual-fuel range cooker that gives you the best of both worlds.
Many experienced home chefs favor gas cooktops for their superior temperature control and capacity to utilize advanced cooking techniques such as charcoaling. These cooktops can be expensive, particularly when you need an additional gas hook-up and electrician to install it.
What is a 13amp plug?
If you have a dual fuel range cooker (also called a gas and an electric oven) you'll need an outlet with 13 amps. The plug should also be hard-wired by a qualified electrician into the cooker ring.
This ensures that the flow of current through the plug will not exceed the limit of safety which could cause an electrical fire. The plug is equipped with an electric fuse that regulates the current. The fuse explodes whenever the current flows through it beyond its capacity, which safeguards the appliance from over-charge of electricity.
The fuse is listed at 13 amps as shown on the top of the plug and this is the maximum amount of current that the plug can carry without causing harm to the appliance or overheating the socket. It is crucial that when replacing fuses, you always use the same amps as the original. If you replace the fuse with one that has the different ratings, you are at risk of overheating the socket and putting yourself and others in high risk.
Ceramic 13 amp fuses are very durable and are able to withstand extreme temperatures that can be generated by the range cooker. Ceramic elements are also fire-resistant, and thus a better choice than other kinds.
There are many ways to install the 13 amp plug. The plug can be connected to a live socket using either a screw or a jaw cord clamp. The clamp must be tightened after the plug is firmly pushed into place.
Some plugs have a diagram of wiring on cardboard over the pins. These must be removed prior to connecting the wires. The wires must be trimmed to the correct length, as if they are too long they can get crushed when the plug covers are replaced. The earth wire should be the longest wire to ensure it is connected prior to the line and neutral pins.
How do I install an outlet with 13amps?
The majority of dual fuel range cookers in the UK are wired to a 13 amp plug socket and this is crucial because ovens draw a significant amount of current and the standard plug sockets are rated at 10 amps.
Generally speaking new appliances should be fitted with an outlet at the time of purchase and it is all part of complying with the Plugs and Sockets etc (Safety) Regulations 1994. However, older appliances may not be connected to an outlet and that is the reason why the problem occurs.
When connecting a cooker to an existing plug socket the first thing to do is to check that the rating of the fuse in the fuse box is in line with the plug's rating. This is very important since a faulty sized fuse could pose a risk.
It is also recommended to ensure that the fuse is completely seated into the cartridge, and that there isn't any movement. Next up is to prepare the flex to be used. Remove the sheathing from the flex, exposing the three insulated conductors within. Use a utility blade to cut the sheathing just beyond the cord grip at the entry point of the plug. The blade will not penetrate the insulated conductors. This nick must be large enough to allow the sheathing and cable to separate as the sheathing is pulled back. Cut off the excess sheathing, leaving a little more than 40mm over the flex.
The flex is then positioned over the plug and the earth terminal is placed at the top and the neutral and live terminals at the bottom. The sheathing of each pin is removed using the conductors in the colour of the wire as a guide. The internal cable is then inserted into the terminal with the help of the cord grip. If the plug has a screw type cord clamp loosen it and pull back the insulation to reveal the copper conductors. Connect each conductor that is insulated to the proper terminal (starting with the earth, then neutral and finally the live) using the channel that they run through the plug.
What is the maximum draw of a 13amp plug?
The maximum current draw of a 13amp plug is 3kw at 230 volts. This is a significant amount of power, however the standard fuse that is fitted in a UK plugtop will not fail until the cable is heated to a dangerous level. It is essential to be aware of the amount of power you are using in your kitchen, since a defective plug or socket can cause an accident.
The fuse inside the plugtops are made of ceramic, approximately 25mm in length and rated 240V mains. The fuses are marked with the BS Kitemark or similar mark on the side, and they'll also contain sand. There are glass or plastic alternatives, however they should not be used with a live plug unless you want to cause a fire and get electrocuted!
Most dual fuel range cookers in the UK need to be hard-wired and will not plug directly into a wall socket. They are typically connected to a separate cooker ring circuit, which is only suitable for appliances that use up to 20 amps.
You can verify the ring circuit of your home by looking at the fuse box or by asking an electrician nearby. Ask whether the sockets are connected to the same ring or if they are distinct. They should also be able to inform you if there is an individual circuit that powers your oven.
The size of your kitchen will be one of the main factors when you're looking to buy a dual-fuel range cooker. We have a wide range of cookers that will fit any space. Choose from small 50-60cm dual-fuel models, or the huge 90cm+ double ovens from top brands like Rangemaster and StovesAreUs.
If you're looking for something different Don't worry, we also have a wide selection of electric and gas multifunction cookers. These multi-functional appliances let you cook a variety of meals, including casseroles, pasta and curries.
Explore our full range of Cookers in Currys online or visit us in-store for a look. duel fuel range cookers provide free delivery and home installation on selected range cookers, and also flexible payment options. Our team is available to answer any questions you have. You can contact us via email or by phone. Credit is subject to status and terms & conditions apply.
What is the maximum draw of the switch on a cooker?
There is a lot of confusion about the maximum current draw for a cooker switch. The truth is that most cookers aren't made to connect to an ordinary socket, but rather are hard wired and fed into a dedicated oven ring circuit. This is because they will often draw more than 20 amps of power when both the gas hob and electric oven are being used.
Therefore, you will not find a dual range cooker with a fuel source that can be fitted to a standard socket as this would present a very significant fire risk and be in violation of electrical regulations. An experienced electrician will install any new electrical components to a cooker in the kitchen, and they will ensure that the load (both the oven and the hob) do not exceed the supply capability of the circuit.
Dual fuel range cookers combine the flexibility of a gas stove and the precision and precision of an electric oven. This is why they are highly sought-after by chefs and cooks at home alike. If you're looking to test different cooking techniques such as searing and grilling, a dual-fuel range cooker is the best option.
When buying a new cooktop, you must consider several factors that include size, performance, and price. Additionally, you'll be required to ensure that your house has an appropriate gas hook-up to the appliance. If you're not sure you're not sure, it's recommended to have an Gas Safe engineer inspect your property prior to installation.
The Currys range of dual fuel range cookers offers options to suit a variety of budgets, ranging from low-cost models from Indesit and Zanussi to our own exclusive Essentials collection. If you're looking for something a little more advanced, we also stock an extensive selection of premium JennAir ranges, which come with a number of new features.
It is crucial to read the instruction manual for the owner prior to purchasing a dual fuel range cooker. This will provide specific information regarding the gas and electrical requirements. You must make sure that your home has a gas hook-up that is suitable and you may have to have a plumber install this for you if it is required. Depending on the home you'll also have to ensure that you have a cooker ring circuit installed and signed off by a qualified electrician.